Table of Contents
Carpet removal is necessary, especially when you are decluttering or renovating your entire house. Removing the carpet from your home is an arduous task. Handling it yourself is even more complex, which is why you should leave it to the pros.Thats why find out how professional tackle carpet removal.
It is never recommended to handle your carpet removal process yourself as you could develop an injury. Check out this website for professionals; they are one of the best in the country. Jiffy Junks are the experts to provide you with efficient and effective carpet removal services.
When you work with a team of experts, they can help you take out the old carpet or padding, replace it with a new one. Make sure your furniture items are back in the places where they belong. It is not an easy task, and doing it yourself is not in any way the best.
That said, finding an expert with a reputation for excellent work is not easy. Ideally, the best thing to do is to hire a reputable company with a team of professionals to help out.
How Do Professionals Remove Carpets?
Professionals who have gone through rigorous training to effectively carry out the carpet removal without damaging the concrete texture or floorboard. Below are a few measures when it comes to removing carpets safely and efficiently:
1. Safety Precautions
A rule of thumb is that, for professional carpet removal, safety comes first. They must be wearing protective gear before attempting to clear the space. By precautions, we also mean removing unwanted items that can lead to accidents or unforeseen injuries. Taking out furniture from the room, including blinds (if there are any), is a part of their safety process.
2. Right Technique to Detach The Carpet from The Tack Strip
The carpets are held in place by tack strips. These tack strips occupy the perimeter of the room. Regardless of how careful the professionals are, they must always work with a set of rules while detaching them. Such as:
- They stay at a specific corner of the room with a pair of pliers; they grab the carpet and then pull firmly while holding it with their gloved hands.
- If the carpet doesn’t come off easily, they use a utility knife to cut out a 6-inch square at the corner of the room.
- The cut-out piece is then removed, and they will proceed to remove the remaining carpet.
Note: All of the tack strips are removable if you ever were to change your floor to wood, tiles, or laminates.
3. Cut The Carpet into Smaller Sizes
Usually, taking out the carpet as a whole is tricky and may lead to unnecessary clustering. Professionals will cut the carpet into more petite strips that are easy to manage and remove. Below is a detailed procedure on how it is done.
- They pull back about 3 feet of carpet and then cut along the fold using a utility knife. It is easier to cut from the back of the carpet other than the front.
- Carefully roll the strips and then secure firmly using duct tape.
- The same happens again for the remaining carpet. When it arrives at a metal transition that separates the carpet from the carpeting and other floorings, they cut it out without touching the transition.
- If the room has a closet, then the team would cut the carpet at the closet door.
4. Remove the Carpet Pad
Sometimes, the carpet is on top of the padding. Removing those is a piece of cake for professionals. Furthermore, professionals follow the same process used to remove the carpet for the padding removal. Also, the padding comes in significantly smaller pieces and can be handled easily. Since it is way lighter, it is easier to roll several pieces together at once.
- Pads on concrete floors may be glued down, and even after careful removal, a large chunk of it may still be stuck to it. Professionals use a very sharp blade to remove these chunks. Use staples to hold down the pad of plywood or particle board floors.
- The floor is properly scraped using the scraper.
- If the floor is hardwood, specialists use different tools to ensure that it is well preserved while scraping. Some of the tools include vise-grip pliers, painters 5-in-1 tool, flat-blade screwdriver, a small, etc. These tools remove the staples without damaging the wood.
Tools Used By Professionals For Carpet Removal
Professionals use these tools for the entire carpet removal process. Pliers
- Protective gloves
- Utility knife
- Knee pads
- Duct tape
- Sharp-bladed floor scraper
- Flat pry bar.
Performing a carpet removal process yourself may seem as though it is easy to carry out. However, it is not as easy as it sounds. It would be best if you considered hiring the services of a professional carpet removal company.
This will not only save you effort and time, but they can guarantee that your floor will retain its initial looks and surface texture after the carpet removal.